The way to use?
1. Clear the dent with a clear moist material.
2. Mount the glue stick into the glue gun, pull the set off to let the glue stick enter into the glue gun, join the facility supply and preheat for five minutes.
three. Glue a Tab with scorching soften glue:
– Use Hammer: Glue a Pulling Tab with scorching soften glue on it is again by glue gun software.
– Use Bridge Puller: Glue the center tab of Bridge Puller set with scorching soften glue on it is again by glue gun software.
four. Put the Tab with scorching soften glue on the middle of dent quick, press calmly till the glue cures and adheres (Let the glue cool for about eight minutes. The cooling time must be lower than 10 minutes and ought to be shorter barely in winter).
5. Pull out tabs:
– Use hammer: Screw the hammer to discover a good range for the spring which may pull the tab out. Then pull out the tabs instantly.
-Use Bridge Puller: Modify the three screws’ peak to discover a good place for the Bridge Puller, then pull out the tabs immediately.
6. Verify with a Line board. If dent nonetheless exists, knock it barely with a flattening hammer or pen.
7. Use the plastic shovel to take away the glue caught on the machine physique. After which clear the repaired place with a clear moist material.
Package deal content material:
1 X Slide Hammer Lifter Carry
1 X 40W Glue Gun
1 X Plastic Shovel
5 X Faucet Down
10 X Pro Glue Sticks
15 X Pro Pulling Tabs
1 X Hammer
1 X Pulling Bridge with 6 Pulling Tabs
1 X LED line BoardPDR Instruments are Reasonably priced – No portray.
PDR Instruments are Quick – Paintless Dent Removing could be accomplished in lower than an hour to repair car dents, repair hail injury dents, versus physique outlets taking a number of days.
PDR Instruments are Handy – Paintless Dent Removing might be provided in your service drive or on a cellular foundation, making it handy for patrons.
PDR Outcomes are BETTER Than Portray – Clients are blown away at what might be achieved with Paintless Dent Repair.
PDR Instruments could be Widey Use – Our PDR Instruments are appropriate for the sheet metallic processing of vehicle, fridge, Motorbike Physique, and washer and so on.